Views: 60 Author: Site Editor Publish Time: 2022-07-11 Origin: Site
The stone cutting machine consists of a cutting knife group, stone transport table, positioning guide plate and frame. The stone cutting machine is made of iron and is suitable for dry cutting and wet cutting of various types of stone, building materials, ceramic tiles, granite, marble, cement slabs, red brick, refractory brick, etc. are essential tools for home textiles. If you want to know more about stone cutting machines, please read the following words.
What to consider when the stone cutting machine is working?
What are the advantages of using stone cutting machines?
What technologies are used by the stone cutting machine?
1. It is strictly forbidden to wear gloves to operate the stone cutting machine. If dust occurs during operation, wear a mask or face mask.
2. Do not try to saw small workpieces that are not clamped.
3. This stone cutting machine is only allowed to cut profiles.
4. Do not perform powerful sawing work and let the motor reach full speed before cutting.
5. No one is allowed to stand behind the saw. Either hand or arm raised.
6. Do not work when the blade is not attached, and do not keep your hands closer than 15 cm from the saw blade.
7. Before repairing or replacing accessories, the power supply must be cut off and the saw blade must come to a complete standstill.
8. If an unusual noise is detected, the inspection should be stopped immediately.
Since the linear motor drive and the main shaft of portable stone cutting machine are the same part, no screw connection, no backlash and accurate movement, the portable stone cutting machine achieves high responsiveness and high tracking accuracy, as well as high precision position control, prevention of wire breakage. The stable processing, which can maintain the best discharge state, improves the discharge efficiency and processing accuracy of the portable stone cutting machine, and overcomes the surface stripes in the wire cutting process.
The CAD/CAM technology of the stone cutting machine has been further improved. After years of development and research, the cutting process of portable stone cutting machine could use the computer to draw pixel graphics, automatically program and control the machining path. In recent years, the portable stone cutting machine has integrated CAD and CAM modules to form a CAD/CAM system from pixel-graphic input to processing process control. Some portable stone cutting machines have also developed a relatively complete CAD/CAM system, including optimization and selection of process parameters based on building a process database.
Due to scientific management, strong technical team, advanced production equipment and manufacturing technology, Dafon Stone Machinery has successfully completed a complete set of curbstone machines, automatic column profiling machines, engraving machines, automatic continuous flame machines, Block cutting machines and infrared bridge cutting machines developed, plate polishing machine, quarry machine, drilling machine, arm polishing machine and etc.