Views: 78 Author: Site Editor Publish Time: 2022-08-17 Origin: Site
The stone cutting machine can cut the stone at different depths and process the stone in less than 1 m3, which can turn waste into treasures, greatly conserve stone resources and also protect the environment. Cutting processing, the processing efficiency is high, coupled with the effective use of small stones, the production cost is low.
How do I clean the stone cutting machine after use?
What are the use and precautions of stone cutting machine?
What to consider before the stone cutting machine works?
Two-piece desktop stone cutting machine with circumferential spring, offset teeth, anti-play structure, two thin desktop stone cutting machines are assembled, each desktop stone cutting machine has two circumferential through grooves, and a short column is installed on the front side of the desktop stone cutting machine for installing the spring. When assembling, make sure that the spring is sufficiently tensioned so that the left and right sides of the two thin table stone cutters are in close contact with the left and right sides of the wide table stone cutter to eliminate the gap between them the tooth flanks.
1. Before starting the stone cutting machine, check the transmission parts in detail and lubricate them well. Many parts must be provided with mechanical lubricants;
2. After performing the inspection and maintenance, wear it first and start the test run, check the mechanical rotation state, and pay attention to the movement of the tool;
3. Check the fixation of the workpiece to ensure that it can be fixed firmly during the cutting process and ensure the cutting safety;
4. Check the condition of the cooling water to ensure the cooling of the cutting knife;
5. In the normal cutting process of stone cutting machine, the cutting process should not be too fast, otherwise the fast feed will damage the blade and machine;
6. Make sure that the cooling water flow is sufficient at all times to prevent insufficient cooling water from aggravating or getting stuck in the wear of the blade of the stone cutting machine;
7. If unusual noise from the main motor is detected during the cutting process of the stone cutting machine, the tool should be withdrawn immediately and stopped for inspection.
1. Wear work clothes, wear safety glasses and wear work hats with long hair.
2. The power switch, saw blade seat, saw blade guard or safety baffle should be inspected in detail. The operating table must be stable and sufficient light should be available for night operations.
3. Turn on the main switch of the stone cutting machine, try to turn it a few rounds without load, and let it start after confirming the safety.
Dafon Stone Machinery Co., Ltd was founded 1996 in the world famous stone city of Shuitou with an area of over 20,000 square meters. Dafon Stone Machinery has specialized in the research, development, production, sales and after-sales of stone machinery and tools over the past 20+ years and has meanwhile become one of the most influential brands in stone machinery industry at home and abroad.